Displaying 1 - 25 of 76 results.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s1078631/www.aecdaily.com/course/1094744
In recent years, the inclusion of wine cellars has become a hallmark of luxury and upscale housing, extending beyond individual homes to multifamily residences, bars, private clubs, and restaurants. This course is a practical guide for architects, designers, general contractors, and engineers on building attractive, efficient, and highly functioning wine cellars that successfully integrate technical requirements with design intent.
https://redirect.aecdaily.com/s1048457/www.aecdaily.com/course/1058538
Identify key fenestration design criteria that will fortify buildings against ballistic, blast, forced entry, and environmental threats.
https://redirect.aecdaily.com/s18795/www.aecdaily.com/course/760575
Fundamentally, a building envelope functions as an environmental separator, and has specific hygrothermal control requirements. This course examines how insulated metal panels (IMPs) create the perfect envelope solution, incorporating the same control layers as site built wall systems. Discussions include: building envelope design; perfect/universal walls; and the use of IMPs to provide the building envelope’s exterior finish, and the air, vapor, water, and thermal barriers.
https://redirect.aecdaily.com/s18795/www.aecdaily.com/course/778805
Lightweight, prefinished, and factory-fabricated insulated metal panels (IMPs) offer building owners a durable, cost-efficient, and easy-to-install roofing system that provides an air barrier, vapor barrier, and insulation all in one product. This course discusses the characteristics of IMPs and the installation process and explains why IMPs are ideally suited for pre-engineered and structural steel buildings. The role of IMPs in a building’s hygrothermal control layers and IMP code compliance are reviewed.
https://redirect.aecdaily.com/s14798/www.aecdaily.com/course/1045296
The operation of mechanical equipment generates vibration and noise, which, if left untreated, can damage the building structure and the equipment itself and be a source of discomfort for building occupants. This course examines HVAC equipment vibration and the specification of isolation solutions. It provides discussions on each of the ASHRAE isolator and base types and describes some acoustical floor treatments.
https://redirect.aecdaily.com/s775747/www.aecdaily.com/course/815408
For some applications, building codes provide for the use of fire-retardant-treated (FR) wood products as an alternative to noncombustible materials. To ensure that FR wood products are properly specified, it is important to understand how these products are made, their formulations, and the building code references that guide their use in construction. This course offers a review of FR wood products, including their manufacture, the applications and types of fire retardants that are available, and the factors that must be considered to ensure FR wood products are properly specified for code compliance.
https://redirect.aecdaily.com/s7934/www.aecdaily.com/course/945391
Today's complex steel structures present numerous design challenges, including the challenge of fireproofing appropriately in order to ensure the safety and well-being of building occupants as well as protection of the structure itself. This course outlines the code and testing standards that inform fireproofing choices and the various passive fire protection products and methodologies that can address a comprehensive range of design challenges; insight into the proper specification of fire protection products as well as their ability to improve LEED® certification levels is also provided.
https://redirect.aecdaily.com/s427660/www.aecdaily.com/course/749008
With the demand for sustainable power on the rise, building owners and homeowners alike are turning to solar power as a supplemental power generator. Choosing the right platform for the solar panels is a critical step in the design process and can have a significant impact on both initial and long-term costs. This course discusses the basics of photovoltaic systems, including the components and rooftop applications. Comparisons between traditional roofing and standing seam metal roofing platforms are examined, and the benefits of a nonpenetrating clamping system are discussed.
https://redirect.aecdaily.com/s9727/www.aecdaily.com/course/811766
Thermally controlled environments such as cold storage freezers and coolers, and food processing and packaging facilities take many different forms. Their performance and functionality depend on their project-specific requirements and can be affected by the conditions the materials and systems are subjected to. This course discusses how insulated metal panels (IMPs) perform the necessary functions to provide an effective energy-efficient building envelope and why they are suitable for use within temperature-controlled hygienic environments—where performance is critical.
https://redirect.aecdaily.com/s12394/www.aecdaily.com/course/866725
Insulated vinyl siding, known as insulated siding, is an exterior cladding that combines the protection and low maintenance of traditional vinyl siding with the energy efficiency of EPS foam. The composite results in an improvement in performance and aesthetics. This course discusses the benefits associated with installing insulated siding on new and renovation residential construction projects, and the range of architectural styles that can be achieved with the breadth of design and color options available.
https://redirect.aecdaily.com/s834268/www.aecdaily.com/course/859869
Outdoor shelters not only provide protection from the elements but also add visual interest to outdoor public spaces, and advances in shelter design are changing the way the recreational landscape is defined. This course looks at current capabilities in shelter design, compares pre-engineered to site-built shelters, and focuses on the advantages of using a manufacturer who offers design and engineering services. Sustainable aspects of shelter design are also discussed.
https://redirect.aecdaily.com/s5057/www.aecdaily.com/course/888587
Building owners value daylighting and views but face security and safety challenges with large amounts of glazing. Thermoplastic sheet products offer a variety of glazing solutions that resist security threats while providing transparency, strength, and durability. This course introduces the grades and characteristics of acrylic and polycarbonate sheet products and discusses how they meet the requirements for protection against forced entry and ballistics.
https://redirect.aecdaily.com/s19871/www.aecdaily.com/course/888488
In the last couple of decades, houses have become progressively more airtight due to energy efficiency and cost concerns. While air infiltration and exfiltration rates have been significantly reduced, the need for an efficient ventilation system has become extremely important. This course evaluates different types of mechanical ventilation systems and discusses why heat recovery ventilation (HRV) and energy recovery ventilation (ERV) systems are characterized by a high level of energy efficiency and as an effective means for improving indoor air quality.
https://redirect.aecdaily.com/s705300/www.aecdaily.com/course/883759
Low Impact Development (LID) has several advantages over traditional stormwater management approaches. Since impervious pavement is the main source of stormwater runoff, LID strategies recommend permeable paving for hard surfaces. The course discusses LID, its goals and principles, and how they are achieved. It provides an overview of permeable pavements, and more particularly, plastic permeable grid paver systems and how they support LID goals.
https://redirect.aecdaily.com/s858139/www.aecdaily.com/course/880596
In a riot, burglary, or active shooter event, the importance of keeping an armed intruder out of a building cannot be underestimated. Examined here are fenestration security risks, considerations, and solutions for educational, religious, commercial, and retail applications, as well as applicable performance testing and standards. The course provides an in-depth discussion on new, retrofit access-denial glazing systems that provide maximum protection against forced entry and ballistic threats.
https://redirect.aecdaily.com/s456403/www.aecdaily.com/course/835024
Stairs are often a prominent feature or even the focal point of an architectural design project and play a vital role in creating an aesthetically pleasing interior atmosphere, or an exterior welcoming point to a residential, commercial, or industrial building. This course provides an overview of the many benefits of installing precast concrete stair treads and landings, how to detail and specify them, and how to address related building code, design, and construction requirements.
https://redirect.aecdaily.com/s890910/www.aecdaily.com/course/959066
Hidden access covers blend utility access covers with the surface continuity of streetscape, hardscape, and landscape designs. This course reviews the functions, product types, and specification and installation considerations of hidden access cover solutions.
https://redirect.aecdaily.com/s796052/www.aecdaily.com/course/1132865
Synthetic sports turf systems offer all-weather play for a wide variety of sports and provide a consistent, durable surface with lower maintenance costs than natural grass. This course reviews the components of synthetic turf systems, different product types, and procedures for installation, maintenance, and use. Guidance is offered on how tested values can impact field performance and how to specify a system that meets safety, performance, use, and budget requirements.
https://redirect.aecdaily.com/s746194/www.aecdaily.com/course/892298
Today, architects and designers need to give special consideration to building acoustics when developing plans for new and newly renovated construction projects. Excessive noise in any environment is considered a serious problem that can negatively impact occupant comfort, leading to learning difficulties, sleep deprivation, delayed recovery from illness, and lack of privacy. Sound basics are discussed in this course, and STC, IIC, and sound attenuation (reduction) techniques are explained. Various case studies are examined to develop further understanding of the performance of common sound abatement assemblies that are essential for occupant well-being and comfort.
https://redirect.aecdaily.com/s877426/www.aecdaily.com/course/904671
The need to evaluate thermal bridging in a building’s design and performance has become more prevalent because of the increasing requirements for more energy-efficient buildings. This course provides an introduction to thermal bridging, energy code requirements, and the use of thermal break solutions designed to improve energy efficiency in the building envelope.
https://redirect.aecdaily.com/s795432/www.aecdaily.com/course/681191
Healthcare facilities are now striving to meet the needs of all patients to offer not only healthy and safe spaces, but inclusive spaces as well. Recent advances in plumbing design for healthcare facilities are helping to keep all patients and caregivers safe and healthy. This course reviews innovations in plumbing design and how these designs support trending healthcare needs such as ADA patients, bariatric patients, behavioral healthcare, and infection prevention.
https://redirect.aecdaily.com/s879124/www.aecdaily.com/course/912416
Movable pool and spa floor technology enables an entirely flexible, multifunctional living and recreational space to complement any architectural vision. Presented here are types of movable pool floors, pool floor technology, options and amenities, and safety and sustainability performance considerations.
https://redirect.aecdaily.com/s13011/www.aecdaily.com/course/797126
A rooftop solar photovoltaic system offers myriad benefits to both building owners and the environment; to maximize the benefits, however, it is important to be aware of the potential causes and effects of problems with rooftop installations. This course presents the issues to consider to prevent damaging the roof, voiding the roofing warranty, and incurring additional costs. Solar system mounting options are explored in terms of how they can help eliminate concerns around rooftop installations.
https://redirect.aecdaily.com/s455170/www.aecdaily.com/course/847332
Incorporating bulletproof glass into any facility is a sizable investment; however, it is a small price to pay for the protection of human lives. This course illustrates how to maximize that investment by selecting and installing the appropriate system for the threat level and the functional needs of the client. Discussed are UL protection level ratings; types of bullet-resistant barrier systems and their components; planning, production, and installation of systems; security window film vs. bullet-resistant glass; and project security checklists.
🍪 We use cookies to offer you a better browsing experience, analyze site traffic, personalize content, and serve targeted advertisements. Read about how we use cookies and how you can control them by clicking here. Click "cookie settings" to adjust your preferences.
