Featured

Displaying 50 featured courses.

  • ( ~ 1 hour ) 

    When renovating an existing bathroom, there is a choice between the resurfacing of existing wall coverings, bathtubs, or showers and a complete renovation where all the existing elements are removed and replaced with new ones. This course outlines the pros and cons of each alternative and introduces modern acrylic products as an excellent choice for either. You will learn all the ways that acrylic can be utilized in both new and renovated bathrooms and all the technical information required for a successful design outcome.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour, 15 minutes ) 

    According to building professionals, the solution to achieving an energy-efficient building envelope is to focus more on the roof. Protected membrane roof (PMR) assemblies deliver thermal efficiency and can play a valuable role in a sustainable design strategy. Presented in this course is a review of the components, advantages, ballast options, and design and installation considerations of PMR assemblies.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Traditional and modern, linear direct vent gas fireplaces safely provide supplemental heat while preserving indoor air quality. The course explores gas fireplace venting systems and heater- and decorative-rated fireplace options, electric fireplace options, functions, aesthetics, and applications. Also discussed are innovative technologies that enhance performance, applicable codes and standards, safety requirements and precautions, and size considerations.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Cooktops are manufactured and classified by construction type and method of heat energy transfer. This course reviews the operation, control, performance, and efficiency of induction cooktops in comparison to their gas and electric counterparts, and shows how induction cooktops can be incorporated into any kitchen design in residential and specialty-commercial applications such as marine, mobile, military, academic, institutional, and hospitality.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Wind load can significantly impact buildings, affecting their structural integrity and safety. Perimeter roof edge systems are a primary safeguard during strong wind events. This course provides an overview of the types, features, and benefits of perimeter roof edge systems, system selection considerations, the impact of wind uplift on roofs, and the building codes and testing standards applicable to perimeter roof edge systems.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Designing with green roofs affords design professionals opportunities to plan projects with exciting new elements, added value, and significant, tangible benefits, thereby enhancing the built environment with newly-created landscapes. This course examines green roof systems, including the types, benefits, components, and related standards. As well, it provides a discussion on how green roofs mitigate urban heat island effect and reduce stormwater runoff.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour, 15 minutes ) 

    Rubber has been recycled for more than a century and used in recycled rubber flooring for over 65 years. Over this time, it has been proven to be a durable and flexible product that improves numerous aspects of the built environment while benefiting the natural environment. This course examines the sustainability attributes of recycled rubber flooring, how rubber is recycled, how it is used to make flooring, its health and safety benefits, and where to use and not use the product. The course also includes an overview of how recycled rubber flooring can be used to meet a number of USGBC’s LEED® v4 BD+C and WELL Building Standard® v2 credit requirements.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    The beautiful gray patina of zinc architectural metal has graced the rooftops of buildings in Europe for hundreds of years. This course examines the sustainable characteristics of zinc as a roofing material, including its 100% recyclability, zero VOC requirement, and low embodied energy production process. The life cycle analysis of zinc is examined, as is zinc’s long-term service life. Various types of roof and wall applications are also discussed.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 15 minutes ) 

    Code-mandated requirements for inspections first appeared in the Uniform Building Code in 1927, and their original intent is still recognizable in our current codes: inspections by a building official are required at specific points in the construction process. In this course, we will examine an alternative to the periodic inspection process, the full-time inspector of record (IOR). We’ll review the historical context and qualifications of the IOR, when a project may benefit from an IOR, and the impact of using an IOR on life safety and property damage.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 30 minutes ) 

    Prequalification of contractors is a method used to manage the risks of an open tender process. It ensures the contractors invited to bid on the project have demonstrated applicable experience and are capable of delivering the necessary quality and value. This course is a primer on contractor prequalification and describes who benefits from the process, the applicable project delivery methods, the role of the architect, the typical information requested of the contractor, and when to use prequalification and when not to.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    The architectural uses for perforated metal span a wide variety of interior and exterior applications for residential, industrial, and commercial projects. Reviewed in this course are the applications and the specification considerations for standard and custom perforated metal, along with a discussion on how it is used to sculpt light, control sound, and compose views.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Wood is both beautiful and practical but lacks long-term durability when used outdoors. Acetylation changes the material properties of the wood at the molecular level to improve its stability and weathering capabilities. This course reviews the acetylation process, its impact on wood performance, and how and where this type of wood can be used. Also discussed are the green features of acetylated wood and how it can contribute toward earning points in the LEED® v4 green building rating system.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Drying hands thoroughly is crucial for maintaining hygiene levels, and when a hand dryer is too slow, the result is many people give up trying to dry their hands and leave the bathroom with wet or damp hands. Research has shown that damp hands can transmit up to 1,000x more bacteria than dry hands. This course discusses hand-drying concepts and the advantages of hand dryers with air knife technology. It also reviews the impact the choice of hand-drying equipment has on public health, occupant comfort, facility operations, and our environment.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour, 15 minutes ) 

    According to the U.S. Centers for Disease Control and Prevention (CDC), handwashing is one of the best and easiest ways to prevent the spread of germs. However, drying hands is just as important as washing them. This course introduces the reader to the main features of air knife hand dryers and discusses how their technical components, such as high-efficiency particulate (HEPA) filtration, touch-free operation, and fast dry times, contribute to their hygienic performance.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Modern hydronic radiator systems are an energy-efficient, healthy, and hygienic solution for residential and commercial applications. This course discusses the principles of radiant heating and panel radiators, and how to size panel radiators for residential applications.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour, 15 minutes ) 

    Vacuum insulation panels (VIPs) offer higher thermal resistance per unit thickness than traditional insulation materials. This means a building envelope can meet the effective R-values for enclosures required by the energy codes without having to increase the thickness of the walls, roof, or floors. This course discusses how VIPs work, why they are effective, and the impact the properties of the materials used to construct a VIP can have on its performance. VIP installations and the latest developments in VIP technology are reviewed to illustrate the advantages of using VIPs as thermal insulation in the design of energy-efficient buildings.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour, 30 minutes ) 

    In a riot, burglary, or active shooter event, the importance of keeping an armed intruder out of a building cannot be underestimated. Examined here are fenestration security risks, considerations, and solutions for educational, religious, commercial, and retail applications, as well as applicable performance testing and standards. The course provides an in-depth discussion on new, retrofit access-denial glazing systems that provide maximum protection against forced entry and ballistic threats.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour, 15 minutes ) 

    Coatings are about more than a building’s appearance; they play a vital role in preserving the architectural elements of the façade. This course explains coating chemistries and manufacturing, as well as the role they play in sustainability. The course also offers a detailed look at industry standards and tests that result in coating performance metrics. Specifying the correct coating for a given application can dramatically improve a building’s appearance and its cradle-to-cradle environmental footprint.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Whether for new construction or a retrofit, doors and openings play an integral role in defining how a space functions and can impact occupants in multiple ways, making door selection an important process. This course discusses the many benefits sliding and pocket doors offer, including aesthetics, space savings, improved occupant flow, accessibility, and ease of operation. Typical sliding and pocket door hardware types, methods of operation, and installation are also reviewed.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Natural and artificial lighting surrounds us at all times. Light helps us to work safely, enhances design, creates atmosphere, and influences our well-being. This course discusses the circadian rhythm, occupant health, and lighting color temperature, and it examines LED lighting requirements and options for lighting-integrated bathroom mirrors and cabinets.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Solid surface material is a durable and sustainable solution for custom architectural solutions. Explore the extensive design possibilities of this nonporous, thermoformable material and review key performance characteristics and fabrication guidelines.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Selecting a countertop surface today, whether for a break lounge or a reception desk, means weighing the relative sustainability of the choices while considering whether the material meets the design objectives of the space. This course will help you decide whether quartz surfacing does that. We will review its performance characteristics and environmental and human health impacts, compare it to other options, and guide selection and design.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour, 15 minutes ) 

    Metal is a versatile building material, boasting both historical credentials and modern aesthetics. To earn the right to rise to the top as the material of choice, however, metal must also demonstrate cost efficiency, durability, and minimal environmental impact. In this course, we will examine the value of metal roofs and walls during initial construction and through a building’s life cycle and illustrate metal’s benefits with a number of case studies.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    The beaches and proximity to the Atlantic Ocean are some of the advantages of living in Florida. However, the extreme wind forces from hurricanes can easily damage even the strongest buildings and cause billions of dollars in property loss. As a result, certain areas of Florida―Miami-Dade and Broward Counties—have been designated High Velocity Hurricane Zones. The building products used in these zones must be laboratory tested to meet extreme wind and pressure performance standards. This course explains why a metal roof system designed to minimize the damage from hurricanes is important.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    This course addresses the health, safety, and welfare concerns to account for when specifying and installing a modular masonry fireplace. The course discusses the advantages of modular masonry fireplace systems and their uses. When installing fireplaces, it is necessary to understand that safety codes, clearances, and restrictions are for the well-being of the installer as well as the homeowner. We cover these codes and regulations in this course.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour, 15 minutes ) 

    A metal roof combines performance and aesthetics to give commercial and residential buildings strength, longevity, and character. This course examines the features and benefits of standing seam metal roofing and explains the factors to consider when selecting a project-specific metal roofing system.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    A rooftop solar photovoltaic system offers myriad benefits to both building owners and the environment; to maximize the benefits, however, it is important to be aware of the potential causes and effects of problems with rooftop installations. This course presents the issues to consider to prevent damaging the roof, voiding the roofing warranty, and incurring additional costs. Solar system mounting options are explored in terms of how they can help eliminate concerns around rooftop installations.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Designing beautiful, sustainable, high-performance buildings can help your structures leave a lasting impression and positive impact. Insulating concrete forms (ICFs) accomplish that while providing innovative design possibilities for single or multistory projects. Learn about the features and advantages of building with ICFs designed as a cost-effective, energy-efficient solution that offers substantial benefits over traditional construction methods.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour, 15 minutes ) 

    Glass doors, windows, and storefronts are among the most vulnerable points of entry in the building envelope, and with episodes of riots, smash-and-grab crime, forced entry, and active shooters on the rise, the need for security glazing is growing. This course provides an understanding of the physical security needs of the built environment and what requirements should be met by threat mitigation products for existing storefront and building glazing. The course focus is on a new generation of clear, retrofit security “overglaze” systems utilizing heavy-gauge, architectural-grade polycarbonate and extruded framing designed to resist forced entry and ballistic attacks.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Urban warming negatively impacts human health and quality of life, energy use, air quality, social equity, and economic prosperity. This course describes how solar reflective cool roof and wall materials help protect individuals and communities from the impacts of extreme heat and discusses the factors that influence energy savings and performance. The course also notes various climate resilience initiatives, green building programs, and energy codes that require or promote the use of cool roofs or walls and concludes by explaining the important role of third-party product ratings and the educational resources available online.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Access panels are covers for the openings in walls or ceilings that allow access to concealed equipment for the purpose of maintenance or replacement. This course provides a detailed understanding of architectural wall and ceiling access panels, including how they are specified, installed, and finished. Design and selection considerations such as ventilation options, safety, security, and fire-rated enclosures are also examined.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Commercial building interiors see all kinds of wear and tear on a daily basis. Various forms of wall protection can combat this wear and tear to help extend the longevity of a space, maintain a clean look, and cut down on maintenance costs. This course discusses the different wall protection products available, how to identify which wall protection products fit certain applications, and which building codes apply to these products.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour, 15 minutes ) 

    Specifying door products that are durable enough to withstand the rigorous demands of high-traffic applications in the healthcare and hospitality industries is crucial to the long-term success of each installation. This course reviews traditional doorway materials and doorway protection options, and provides design solutions that utilize engineered polyethylene terephthalate (PETG) components that extend the life of the door assembly and minimize health and safety issues for the building occupants.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour, 15 minutes ) 

    Today’s louvers not only are functional but also offer enhanced architectural design to the façade of many buildings. More than just a hole in a wall, louvers are responsible for reducing or eliminating water infiltration and offer protection from heavy storms and hurricanes. Different types of louvers and their applications are discussed in this course as well as specific terminology, AMCA/BSRIA testing procedures, and the Certified Ratings Program.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour, 15 minutes ) 

    An expansion joint is a structural gap designed to accommodate the movement of a building in a controlled manner, preventing damage to the building’s internal and external finishes. Expansion joints run throughout a building in walls, ceilings, and floors. Expansion joint covers provide a covered transition across an expansion opening and remain unaffected by the relative movement of the two surfaces either side of the joint. This course explains how to determine joint movement requirements and how to size a joint. It also discusses the performance of different expansion joint cover systems and the applicable fire protection and building codes.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Currently, buildings are the single biggest contributor to GHG emissions, accounting for roughly half of all energy consumption in the U.S. and globally. It is crucial to reduce this level of consumption by including high-performance envelope strategies such as shading systems in all new building designs. In this course, we look at shading systems, examine shading and design strategies, and learn tips for successful selection and design.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Beneficial acoustic environments are especially important in healthcare facilities as inappropriate acoustics can be damaging to patients and stressful and tiring to staff. Because a beneficial acoustic environment plays an important role in supporting health, safety, and well-being for all occupants, acoustic issues are now a key component of healthcare design guidelines. This course explores the impacts of acoustics on healthcare, outlines the relevant acoustic standards and guidelines, and describes the methods by which designers can address the issues and improve healthcare facility conditions for patients, families, and healthcare workers.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    The purpose of this course is to provide an introduction to the use of entrance floor systems in commercial buildings in order to promote a safe and clean environment. The course explains the codes, regulations, and guidelines specifically related to entrance flooring systems for high-traffic entrances in healthcare, education, transportation, corporate, and other commercial settings.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    This course discusses healthcare-associated infections (HAIs) and how the built environment can contribute to restricting their spread. We’ll look at the social and financial impact of HAIs and address factors that contribute to the spread of infection. The course offers solutions on how to design spaces and select products to reduce HAI incidences in healthcare settings, improving patient and employee safety and wellness.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour, 15 minutes ) 

    Considering gate hardware early in the design process enhances the aesthetics and functionality of perimeter security. Gate hardware balances durability, security, and ease-of-use without detracting from the design. This course examines latches, plain pivot and self-closing hinges, closers and accessories for swing gates, and wheels for sliding gates; it also offers guidance on specification and installation.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    The demand for mass timber construction has increased significantly in recent years due to its numerous benefits, including sustainability, strength, faster construction times, cost savings, and a natural wood aesthetic. However, a major drawback of mass timber construction is its poor acoustical performance. This course examines the various mass timber construction types and provides acoustical solutions to meet and surpass building codes.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Designing restrooms to allow for and maximize proper hygiene is important in reducing the spread of germs. This course discusses the elements of hygienic restroom design and how reducing required touchpoints helps to increase safety and cleanliness. The key steps in proper hand hygiene are also discussed. The course then focuses on hand dryers and considers their impact on hand hygiene and sustainability. The future of commercial restroom design is then explored.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour, 15 minutes ) 

    This course explores a 5,000-square-foot office expansion recently completed by Excel Dryer. The building owner was committed to reducing their environmental impact and building a beautiful, healthy, sustainable, and functional space. This course discusses the relevant tools for sustainable, healthy buildings, including the WELL Building Standard™ version 2 and the LEED® v4.1 Building Design and Construction rating system. The methods for achieving these goals are examined through various building products and systems: walls, furniture, HVAC, sound masking and acoustic systems, flooring, daylighting and solar shading, and plumbing.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Unwanted sound can become more than a mere annoyance. Excess noise has been found to increase stress and distraction, reduce learning and productivity, and even lead to hypertension and permanent hearing loss. This course presents an overview of how sound is described and measured and describes the many industrial and architectural products available to control noise in virtually any environment.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour, 15 minutes ) 

    The hospitality industry thrives on positive customer experiences. These experiences are often shared on social media, and reviews of a restaurant or hotel now commonly include the acoustical aspects of the experiences. Hospitality venues must be constructed to the highest standards in order to achieve the necessary level of customer satisfaction; this includes providing a positive acoustic environment for a wide range of situations. In addition to reviewing the basics of sound, sound movement, and sound measurement, this course details the comprehensive range of applications available to the designer to block unwanted noises, control the acoustics in large venues, and provide complete privacy where it is needed while improving the aesthetic appeal of each space as a result.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Good acoustic and aesthetic environments are important to the health, safety, comfort, satisfaction, productivity, and general well-being of all building users. This course outlines the benefits of and methodologies for simultaneously creating both with wall and ceiling acoustic treatments. The highly illustrated course includes detailed descriptions of the many acoustic wall and ceiling treatment options available, as well as sample installations.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Rapidly changing trends in our society, such as urbanization and a modern lifestyle, have resulted in the isolation of humans from experiences within nature. Research has shown that the psychological effects of biophilic design on noise perception have a significant influence on the well-being and health of humans. In this course, we review the science of sound, identify the potential problems associated with noise, and introduce the range of acoustic solutions formed from polyethylene terephthalate (PET) felt designed to provide sound-dampening benefits for busy commercial, educational, and healthcare facilities.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour, 15 minutes ) 

    Undesirable acoustics in educational spaces have long been considered averse to our goals to effectively teach, create, collaborate, listen, and learn. Now, in the wake of implementing pandemic protocols, our acoustic comfort in these spaces is greatly challenged. This course examines the impacts of poor soundscapes in educational facilities and introduces innovative solutions for improving acoustics in these areas while keeping us comfortable and safe from exposure to emerging viruses.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    The operation of mechanical equipment generates vibration and noise, which, if left untreated, can damage the building structure and the equipment itself and be a source of discomfort for building occupants. This course examines HVAC equipment vibration and the specification of isolation solutions. It provides discussions on each of the ASHRAE isolator and base types and describes some acoustical floor treatments.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    In designing successful interior building spaces that positively impact their occupants, it is critical to have knowledge of the principles of acoustics and noise control and link them to design methodology. This course explores these principles, with a special emphasis on common building types where acoustics and noise control are often required and noise can have detrimental effects on users, such as athletic facilities and performance spaces.

    Ask a Question
    SAVE FOR LATER